Custom configured, quickly delivered!
Your shopping cart is empty Shopping Cart
Buy Online or Call 800-237-0402

Tyan Transport CX GC68AB8036-LE B8036G68AV10E2HR-LE Server - System Overview


Tyan GC68AB8036 B8036G68AE12HR front panel detail

The cloud platform supports the latest technology including two PCIe Gen4 slots for double the speed and reliability compared to PCIe 3.0. The Tyan Transport CX GC68AB8036-LE B8036G68AV10E2HR-LE platform also supports a single AMD EPYC processor from the newest 7003 series or the previous 7002 series. 12x storage bays up front can support SATA and NVMe drives.


Putting up to 64 cores to work, the single-socket Tyan Transport CX GC68AB8036-LE B8036G68AV10E2HR-LE system supports either an AMD EPYC Rome (7002) or Milan (7003) series processor. The latest CPUs are based on the 7nm process technology. Each processor also supports 8x memory channels. This configuration has 16x DIMM slots, which can support up to 4TB of memory running at speeds up to 3200MHz, depending on your choice of processor. The configurable thermal design power (cTDP) on this server is a maximum of 240W.


Under the lid, this platform features 8x memory channels, with two memory modules per channel, for a total of 16x active memory module slots. The chassis is based on the S8036GM2NE-LE motherboard supports several types of memory including: Registered RDIMM) memory modules, Load-reduced (LRDIMM) memory modules, and LRDIMM 3DS. The DIMMs support speeds of up to 3,200MHz and a maximum memory capacity of 4,096GB when using either RDIMMs or LRDIMMs.


Transport CX B8036G68AE12HR internal components

The high-performance B8036G68AV10E2HR-LE platform is a 1U cloud server with support for 12x front-access 2.5-inch hot-swap, tool-less drive bays. All bays can be configured with SATA drives by default, however, the 2x leftmost drive bays are hybrid and can be configured to support NVMe U.2/SATA 6G/SAS 12G. If needed, there are 2x NVMe/SATA M.2 slots on the motherboard to be used as boot drives or to support a hypervisor. The other system in the GC68AB8036 family, the B8036G68AE12HR, supports 12x NVMe U.2 drives, or 8x NVMe drives with 4x SATA drives operating at 6G.


There are 2x PCIe Gen4 x16 slots via pre-installed Tyan riser cards that can be accessed through the rear of the chassis to support full-height or half-height, but both at half-length. The Transport CX GC68AB8036-LE B8036G68AV10E2HR-LE server also comes with 1x PCIe Gen.3 x16 OCP 2.0 slot.


As for management, the system is equipped with the AST2500 baseboard management controller (BMC) with Redfish support. The BMC is accessed through the integrated platform management interface (IPMI 2.0) and allows administrators to monitor critical components at chassis or remotely such as fan speeds, temperature, hardware failure, and more.


Driven by AMD’s Infinity architecture, the Tyan Transport CX GC68AB8036-LE B8036G68AV10E2HR-LE is a 1U, single-socket, AMD EPYC 7002 or 7003 series processor-based platform. The system features 16x DDR4 DIMM slots, two standard PCIe Gen4 x16 expansion slots, and support for both SATA and NVMe storage drives. With up to 4TB of memory, this server has plenty of room for further growth as business requirements evolve.

Tyan Transport CX GC68AB8036-LE B8036G68AV10E2HR-LE Server - Specifications

Processor - Single Socket
  • AMD Socket SP3
  • AMD EPYC Processor
  • 7002/7003 Series
  • Max up to 240W
  • Up to 16 x DIMM slots
  • Memory Speed: 3200
  • Memory Voltage: 1.2V
  • Memory Channel: 8 channels
  • Maximum memory configuration

  • 2,048GB RDIMM
  • 4,096GB LRDIMM
  • 4,096GB LRDIMM 3DS
  • *Actual memory speed depends on memory population topology

Drive Bays
    Front Bays

  • 12x hot-swap 2.5" SATA 6Gb/s with 2x hot-swap 2.5" NVMe
  • HDD Backplane Support

  • SAS 12Gb/s /SATA 6Gb/s /NVMe
  • Supported HDD Interface

  • 12x SATA 6Gb/s & SAS / 2x NVMe
  • *The SAS/SATA HDD backplane is connected to onboard SATA connection by default

Power Supplies
    Output Watts

  • 850 Watts
  • Efficiency

  • 80 plus Platinum
  • Input Range

  • AC 100~240V/ 12~6A
  • Redundancy

  • 1 + 1
  • 5x 4028 + 1x 4056 fans
Front/Rear Panels
    Front Panel

  • Power Button with LED
  • ID Button with LED
  • IPMI/Warning LED
  • 1x USB 3.1 Gen1 Port
  • Rear Panel

  • 2 x Power Supply Units
  • 2 x LAN1 (dedicated for IPMI)
  • 1 x VGA
  • 2 x USB 3.0 Ports
  • 1 x Serial Port
  • 1 x LAN2
  • 1 x LAN3
  • 1 x OCP Card Area
  • 1 x ID LED/Button
  • 1 x Expansion Slots ((Half-height / Half-length PCI-E Gen.4 x16 card w/ tall bracket x2)
Expansion Slots


  • 1x PCI-E Gen4 x16 slot (FH/HL)
  • 1x PCI-E Gen4 x16 slot (HH/HL)
  • Pre-Installed Mezzanine Card

  • 1x M8036-L16-1F for 1x HH/HL PCI-E Gen 4 x16 slot (Left)
  • 1x M8036-R16-1F for 1x FH/HL PCI-E Gen 4 x16 slot (Right)
  • Others

  • 1x PCI-E Gen.3 x16 OCP v2.0 mezzanine slot
  • Physical Dimension Abbreviation

  • HH/HL (Half-height / Half-length): 2.7" x 6.6" (68.9 x 167.7mm)
  • FH/HL (Full-height / Half-length): 4.4" x 6.6" (111.2 x 167.7mm)
    Height: 43mm (1.69")
    Width: 438.5mm (17.26")
    Depth: 680mm (26.77")
    Net Weight: 10.5kg (23.5 lbs)
    Gross Weight: 20 kg (44 lbs)
  • Onboard Aspeed AST2500
  • 24-bit high quality video compression, Supports storage over IP and remote platform-flash & USB 2.0 virtual hub
  • IPMI 2.0 compliant baseboard management controller (BMC)
  • 10/100/1000 Mb/s MAC interface

Get a quote for Tyan Transport CX GC68AB8036-LE B8036G68AV10E2HR-LE Server

If you know what you want but can't find the exact configuration you're looking for, have one of our knowledgeable sales staff contact you. Give us a list of the components you would like to incorporate into the system, and the quantities, if more than one. We will get back to you immediately with an official quote.

[email protected]