Custom configured, quickly delivered!
Your shopping cart is empty Shopping Cart
Buy Online or Call 800-237-0402

Tyan Transport CX TN73B8037 B8037T73X4-200PE4HR Server - System Overview


Tyan Transport TN73B8037 B8037T73X4-200PE4HR Server front view

With four individual single-socket nodes, the Tyan Transport CX TN73B8037 B8037T73X4-200PE4HR server can support a variety of different workloads in the same chassis, at a reduced cost. The chassis supports the power requirements for the nodes. The nodes are outfitted with a single processor, 8x memory module slots, four 2.5" storage bays, and three fans each plus a management port on the front of the system. Other chassis configurations:

Tyan Transport CX TN73B8037 B8037T73X4-200PV4HR server (SATA III storage)


Each of the four nodes supported on the Tyan TN73B8037 B8037T73X4-200PE4HR server have a single AMD EPYC 7002 series processor supporting a maximum Thermal Design Power (TDP) or 240W. Only DDR4 load reduced (LRDIMM) or registered (RDIMM) memory modules are supported at speeds of up to 3200MHz. Each AMD EPYC 7002 series processor supports 8x memory channels. Powering the system are two 1 + 1 redundant PSUs offering 2000W of power each.


Four 2.5-inch drive bays are found on the front of each of the server nodes for a total of 16x drive bays with all nodes. Drive bays can be outfitted with up to 4x (SATA or NVMe U.2) hot-swap drives operating a 6Gb/s using the integrated SATA controller. Two additional internal NVMe slots in each server sled support a single M.2 drive.


There are 8x memory module slots in each of the four nodes. Using 512GB 3Ds LRDIMMs in each slot will provide up to 4TB. If you plan on using RDIMMS, the system will support a maximum of 2TB using 256GB memory modules in all 8x slots. Memory will run at up to 3200MHz.


Tyan Transport TN73B8037-B8037T73X4-200PE4HR Server rear view

Each sled also supports two HH/HL PCIe 4.0 x16 slots for expansion cards. There’s also an open compute project (OCP) 2.0 LAN card under those PCIe risers for adding a super-fast network connection, in each node.


Management of each node is provided right in front offering an onboard Aspeed AST2500 module with standard IPMI 2.0 compliant baseboard management controller.


The Tyan Transport CX TN73B8037 B8037T73X4-200PE4HR server is a very capable platform for use in cloud and data centers offering lower application licensing costs with only a single CPU in each of the compute nodes. A compact 2U form factor, combined with powerful performance from AMD’s EPYC 7002 series processors, also gives this platform the flexibility for use in a number of different applications.

Request A Quote

Tyan Transport CX TN73B8037 B8037T73X4-200PE4HR Server - Specifications

Processor - 1 socket per Node (4 Nodes total)
    AMD EPYC 7002 Series Processor
    Aspeed AST2500
    Supported DIMM Quantity

  • 8 DIMM slots
  • DIMM Type / Speed:

  • Capacity:

  • Up to 2,048GB RDIMM / 4,096GB LRDIMM 3DS
  • Memory channel

  • 8 Channels per CPU

  • 1 x SFF-8654 connector for up to 4 x SATA ports
  • Controller:

  • Direct from AMD EPYC CPU
  • Speed

  • 6Gb/s
Drive Bays

  • 4 x 2.5" Hot-Swap SSD per node
  • HDD Backplane Support

  • SAS 12Gb/s / SATA 6Gb/s / NVMe
  • Supported HDD Interface

  • 4 x SAS 12Gb/s / SATA 6Gb/s
Expansion Slots

  • 2 x PCIe x16 slots
  • Pre-install TYAN Riser Card (PCI-E Gen4)

  • 1 x M8037T73-R16-1L riser card for 1 x HH/HL
  • 1 x M8037T73-L16-1L riser card for 1 x HH/HL
  • Others

  • 1 x PCI-E Gen3 x16 OCP 2.0 slot (conn.A+conn.B)
  • Physical Dimension Abbreviation

  • HH/HL (Half-height / Half-length): 2.7" x 6.6" (68.9 x 167.7mm)
I/O Ports

  • 1 x USB3.1 TYPE-C (@ rear)
  • 2 x USB3.1 Gen1 ports (via Cable)
  • COM:

  • 1 x header (COM1)
  • VGA:

  • 1 x D-Sub 15-pin port
  • RJ-45

  • 2 x GbE ports
  • 1 x dedicated GbE for IPMI

  • 2 x GbE ports
  • 1 x GbE dedicated for IPMI
  • Controller

  • Broadcom BCM5720
  • PHY

  • Realtek RTL8211E
Power (1 + 1 Redundancy)
  • 80-PLUS Platinum 1,968 Watts (220-240Vac input)
Graphics Card
    Connector Type

  • D-Sub 15 pin
  • Resolution

  • Up to 1920 x 1200
  • Chipset

  • Aspeed AST2500
    2U Rack

    Dimensions (D x W x H)

  • 28.74" x 17.32" x 3.44" (730 x 440 x 87.5mm)
    Onboard Chipset

  • Onboard Aspeed AST2500
  • AST2500 iKVM Feature

  • 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
  • AST2500 IPMI Feature

  • IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface

Request A Quote

Get a quote for Tyan Transport CX TN73B8037 B8037T73X4-200PE4HR Server

If you know what you want but can't find the exact configuration you're looking for, have one of our knowledgeable sales staff contact you. Give us a list of the components you would like to incorporate into the system, and the quantities, if more than one. We will get back to you immediately with an official quote.

[email protected]

Tyan Transport CX TN73B8037 B8037T73X4-200PE4HR Server - Documentation